62-110393-15
3.11 TRIP START
COOL DEFROST ALARM START-STOP
SETPOINT BOX TEMPERATURE
ALARM LIST
SELECT
MANUAL
DEFROST
HEAT CONTINUOUS
TRIP START ENTERED
+36 F
-20
START--STOP/
CONTINUOUS
2
2. Press the = key.
3. If trip start is acknowledged by the data recorder, “TRIP START ENTERED” will be dis-
played for 5 seconds and then the display will revert back to the normal display. Other-
wise CANNOT ENTER TRIP START will flash and then the display will revert back to the
normal display.
1. To mark the start of a trip in the data recorder, press the SELECT key until
The MessageCenter displays “PRESS = TO MARK TRIP START”.
Trip Start places a time stamp in the data recorder
memory to allow easy review of the data from the last
trip, and to allow downloading data from a specific trip. A
trip begins at a Trip Start, and ends at the next Trip Start.
Trip Start tells the data recorder that the present date
and time is the beginning of a new trip.
To Next Page
Loading...