62-110393-21
Table 3-1. UNIT DATA
* Also appear in Configurations
+ May or may not be displayed depending on functional parameter settings
*
+
REMOTE SENSOR (1--3) This is the temperature at remote Temperature Sensor 1, 2, and 3.
(These sensors are optional, and may not be applicable to your unit. Up
to 3 remote sensors may be listed.)
*
DATALOGGER This is the current Date and Time that the Data Recorder is using. This
may be different than your actual time, depending on the Time Zone and
Daylight Savings Time selections made by the owner of the unit.
To Next Page
Loading...