2
PERIPHERAL DEVICES
1. The EP-60A Electronic Printer
Connection
When connecting this balance to the EP-60A, first be sure to pull up the AC adapter for the balance and
EP-60A. Then connect to data I/O connector as shown below.
Functions
Manual printing
The displayed value is printed whenever the PRINT key is pressed.
Autoprint
In the g display of the balance, when the display is within zero ± 3 count, the display is stabled when
the sample over 20 counts of g display is loaded, the balance automatically prints out. Unload this
sample and wait for the display falls into within zero ± 3 counts, then load a next sample.
Statistic calculation
Pressing the STAT key statistically calculates and prints the data until next pressing of the STAT
key.
See Instruction Manual for Electronic Printer EP-60A for further details.
To Next Page
Loading...
