INSTALLATION
Check power voltage
▶ Use only the AC adapter that supplys the output of 12VDC or the AC adapter provided by the
distributor who is authorized by CAS Corporation.
▶
Check the power supply voltage.
▶ Check that the supplied power voltage satisfies the displayed value on the AC adaptor.
▶
In order to prevent electric shock when connecting the power, use a 3P plug with a grounding
line or a 2P plug after connecting the grounding wire to the screw at the back of the case.
▶
Do not place anything that makes it difficult to pull the AC adapter off the outlet.
Site
Avoid installing the balance in a place where:
▶ It is exposed to corrosive gas or flammable gas;
▶
It is exposed dust, wind, vibration, electromagnetic waves, or a magnetic field;
▶
It is exposed to direct sunlight or a sudden change in temperature; or
▶ It is exposed to extremely high or low temperature or humidity.
Installation
To Next Page
Loading...
