36
Menu-PRT.03: Set Print Line feed
Function Set Print Line feed
Display Part Meaning
Set Range
(0~9)
PLFD. 1
Initial Value: 1
Set a spacing between lines as the set value upon printing
Menu-PRT.04: Set Print Condition
Function Set Print Condition
Display Part Meaning
PRAN. 0
Print out only if the weight value is +
PRAN. 1 Print out only if the weight value is -
Set Range
(0 ~ 2)
PRAN. 2 Print out regardless of whether the weight value is +/-
Menu-PRT.04: Set Print Out Condition
Function Set Print Out Condition (Printing condition)
Display Part Meaning
PRCS. 0
Manual Print
(Printed only if the print key is pushed)
PRCS. 1
Automatic Print
(Printed automatically if the weight value is stabilized)
Set Range
(0 ~ 2)
PRCS. 2
Finish Print
(Printed automatically if the finish signal out in relay operation)
To Next Page
Loading...
