39
2.2.3 Barcode (Menu code 1260)
( MENU → 2. PLU Data Table I → Barcode )
You can use barcode when you create PLU.
Barcode can be changed depending on the Global setting of barcode.
◆ You can press the SAVE key at anytime to save the current data and if you
want to exit without saving, press the ESC key.
1. Enter Barcode No.
• This value can be from 1 to 99.
EX) Barcode No = 1
2. Barcode Type
• See below table.
EX) Barcode Type = 1. EAN-13
• Type of Barcode
No. Type Description
1 EAN-13 13digit
4 I20F5 2~24 digit
9 CODE128C 2~24 digit
3. Enter Barcode Form
• You can select from a list of Barcode
types or you can create your own
custom format
• Refer to below table.
EX) Barcode Form = 1. Change
DDIIIIIPPPPPC to GGIIIIIVPPPPC
Press “PRINT”.
Press ◀ 4 times then
To Next Page
Loading...
