62
3. SALES OPERATION
3.1 Basic Operation
This chapter explains basic operation of scale, such as how to set zero, tare, call up a
PLU and override unit price in CL5000J series. In order to make sales transaction user
should access REGISTRATION mode.
■ How to access REGISTRATION MODE: Turn ON the scale.
3.2 Zero
You can use the ZERO key to correct for a deviation from zero as long as there are no
PLUs or MISC PLUs called-up. The weight can sometimes drift from zero due to
debris on the platter, leaving objects on the platter for excessive periods of time, or
other environmental factors. To correct this, remove everything from the platter and
press the ZERO key when the stable indicator “▼” is on. Below is a possible zero drifted
state that should be corrected by simply pressing the ZERO key.
EX) Initial weight displayed ① → 0.002.
② Press “ZERO” key to set initial zero.
To Next Page
Loading...
Need help?
General
