42
2.2.5 List Unit Symbol (Menu code 1280)
( MENU → 2. PLU Data Table I → Unit Symbol )
◆ You can press the SAVE key at anytime to save the current data and if you
want to exit without saving, press the ESC key.
1. Enter unit number
• This value can be from 1 to 8.
EX) Qty Unit No. = 2
2. Enter unit symbol
EX) Symbol = TH
※ If you want to enter special symbol, press the CHAR key and enter the
code value. (See ASCII code table on chapter 4.4).
3. Save Menu
• If you want to save, press
“PRINT” key.
To Next Page
Loading...
Need help?
General
