22
TEST 4
FUNCTION : Serial interface test
KEY VF DISPLAY SUB DISPLAY DESCRIPTION
: Menu selection
mode
Other keys: Perform test
- - - - - - -
- - - - - 05
13- - - 05
tESt4 SErlAL
Waiting for transmission
or reception.
Transmit : 5, Receive:
none
Transmit: 5, Receive: 13
Note 1. Before testing, you have to connect serial port of computer with serial port of
indicator and run the communication program such as Hyper Terminal in PC.
Note 2. Send no.1 in PC keyboard and check if indicator receives no.1
Send no.1 in indicator keyboard and check if PC receives no.1
Note 3. Do this test after baud rate is specified in SET mode (See F20 at page 30).
TEST 5
FUNCTION : Printer test
KEY VF DISPLAY SUB DISPLAY DESCRIPTION
: Menu selection
mode
Other keys: Perform test
Good
CH 05
tESt5 Print
No error in printer.
Check printer connector.
Note 1. Previously specify the printer which will be used in the conversion mode.(F30)
Note 2. “Good” message is displayed if the printer connection and specification is done'
correctly.
If not, “CH 05” message is displayed.
Note 3. Test format of printing is as follows.
Computer And System
CAS Corporation
http：//www.cas.co.kr
TEL 82-2-2225-3500
FAX 82-2-475-4669
TEST OK
To Next Page
Loading...
