CAS RW-10L - Test Mode Procedures; Test Mode Entry and Keys; Test Menu Overview

Road Weigher
▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩
- 11 -
8. Test Mode
(1) HOW TO ENTER
Turn on the Power while pressing the
key and TEST menu starts.
(2) AVAILABLE KEYS
Key : Increase the first place set value to 1
Key : Move to the left by 1 place of the set value.
Key : Move into next menu.
(3) Test Menu(TEST 1 - TEST 5)
Test 1 : Key test
Test 2 : LCD display test
Test 3 : Load cell test and A/D conversion test
Test 4 : Serial interface test(RS-232)
Test 5 : Printer test
T
T
E
E
S
S
T
T
１
１
< Key Code >
FUNCTION : Key test
KEY LCD DISPLAY DESCRIPTION
LIGHT key :
Next menu
Other key :
Perform test
tESt1
1
Test 1 condition
Press the key to be test and the no.
and code of the key is displayed.
key CODE KEY CODE KEY CODE
ZERO 1 TARE 2 GROSS/NET 3
PRINT 4 * 5 LIGHT 6