Cascade CDO-28 User Manual

32 | Page
cascadesciences.com | Tel. 503 847-9047
OPERATION
Setting the Timer Continued
End of procedure
5.
Set the Tens-of-Minute parameter
Adjust
Set Timer
1 Hour, 51 Minutes
6.
Advance to the Minutes parameter
Press
Set Timer
Minutes Selected
• The flashing decimal point will advance to between the third and fourth
numbers, saving the new Tens-of-Minutes parameter setting
7. Set the Minutes parameter
Adjust
Set Timer
1 Hour, 55 Minutes
8. Wait for 5 seconds after entering the Minutes parameter
Set Timer
• The display will exit adjustment mode.
• The Minutes parameter, along with the previous two parameter values,
are now saved.

Cascade CDO-28 Specifications

General

Brand	Cascade
Model	CDO-28
Category	Laboratory Equipment
Language	English