7 | Page
cascadesciences.com | Tel. 503 847-9047
UNIT SPECIFICATIONS
These ovens are 220 – 240 voltage single phase units. Please refer to the oven data plate for individual
electrical specifications.
Technical data specified applies to units with standard equipment at an ambient temperature of 25°C and
at nominal voltage. The temperatures specified are determined in accordance to factory standards
respecting the recommended wall clearances of 10% of the height, width, and depth of the inner chamber.
All indications are average values, typical for units produced in the series. We reserve the right to alter
technical specifications at all times.
TEMPERATURE PERFORMANCE
Range Uniformity @240°F Stability @ All Temps.
Ambient +26° to 350°F
3.6°F ± 0.4°F
Heat Up Times from Ambient (77°F)
To 240°F
22 Minutes
Temperature Recovery Times, Door Opening @ 240°F
30 Second Opening 60 Second Opening
3 Minutes 5 Minutes
POWER
AC Voltage Amperage Frequency Phase
AIRFLOW PERFORMANCE
Air Exchanges
Per Minute
125
Exhaust Airflow
Cubic Feet Liters
17.3 per Minute 490 per Minute
To Next Page
Loading...
Need help?
General