11 - STORAGE
436
RD02E211
INSIDE ENGINE COMPARTMENT
Rotary Air Screen Brush Storage
The rotary brush should be in storage position
anytime harvesting conditions do not require the use
of the brush as well as when rotary brush is not
needed for more than one week.
Storage Procedure:
A. Remove hair pin and headed pin (1) from
the locking mechanism (2). DO NOT discard
pins.
B. Pull the brush away from the rotary air
screen by compressing the spring (3)
enough to slide the locking mechanism (2)
between the washer (4) and the wing plate
(5).
C. Secure locking mechanism (2) by
reinstalling the headed pin and hair pin (1).
1. ROTOR ROCKING WRENCH IN STORAGE POSITION
1
RR06B004
1. HEADED PIN AND HAIR PIN 4. WASHER
2. LOCKING MECHANISM 5. WING PLATE
3. SPRING
3
4
2
1
5
To Next Page
Loading...
Need help?
General
