Case CX300C - Level in the reservoir; Filling the reservoir

6-MAINTENANCE
Levelinthereservoir
1.Placethemachineonat,levelgroundandplacethe
attachmentinthepositionshown.Stoptheengineand
removetheignitionkey.
INHU39-0031
2.Theoilshouldbeinthemiddleoftheindicator.Add
moreoilifnecessary.See"Fillingthereservoir".
UJHECF-0062
Fillingthereservoir
1.Releaseallpressureinthehydraulicreservoir.Refer
topage6-32.
2.Cleanthecoverplateandtheareaaroundtheplate.
Removethecoverplateandaddhydraulicuidtothe
reservoirasrequired.
3.Replacethecoverplatesealifrequiredandinstallthe
coverplate.
NOTICE:Makesurethatnocontaminant(water,sand
etc.)entersthereservoirduringlling.
YNQGSC-0023
6-35