Case CX300C - Releasing pressure in the hydraulic system

6-MAINTENANCE
Releasingpressureinthehydraulicsystem
ATTENTION:Beforecarryingoutanyworkonthehy-
draulicsystem,thereshouldbenopressureinanyofthe
circuits.
1.Placethemachineonat,levelground,lowertheat-
tachmenttothegroundandstoptheengine.
2.Turntheignitionkeytothe“On”position.
UPMXW8-0011
3.Pushthefunctioncancellationleverforward(safety
barinoutwardposition).
HISNJU-0082
4.Operatethecontrolleversfromrighttoleftandfrontto
rearadozentimesapproximately.
5.Turntheignitionkeytothe“Off”position(shutdown).
UPMXW8-0033
6-32