Case CX300C - Manual regeneration

3-CONTROLS/INSTRUMENTS
Manualregeneration
XNNFHF-001Z5
Normaloperationisdisabledinmanualregeneration.
Whenmanualregenerationstarts,enginerevolutionsarereducedautomaticallyandtheenginesoundandhydraulic
operationsoundchange.
Thesedonotimplyanyproblems.
Ifoperationcontinueswhentheorangelampblinks,thediffusermaybefaulty.
Movetoasafeplaceasquicklyaspossibleandexecuteregeneration.
ATTENTION:Iftheswitchisnotpressedforalongtime,theorangelampchangesfromslowtofastblinking.Ifthe
switchisnotpressedatthistime,theengineproblemwarninglampgoesonandthediffuserneedstoberepaired.
NOTE:ConsultyourCASECONSTRUCTIONDealerifaredDPDiconisdisplayed.
Manualregenerationnishesearlierimmediatelyafterthemachinerunsthanwhentheengineiscool.
Thewatertemperaturemayriseduringmanualregeneration.
1.Theorangelampblinks.
•
Thebuzzersoundsfor2seconds.
•
Thefollowingmessageisdisplayed.
PushDPDswitchtoactivate
2.Movethemachinetoasafeplacewithnocombustibleobjects.
•
Setthefunctioncancellationlevertothelockposition(safetybarretracted).
•
Presstheswitch.
3.Manualregenerationstarts.
•
Theorangelampislit.
•
Thebuzzersoundsfor2seconds.
•
Thefollowingmessagesaredisplayedcyclically.
ManualDPDRe-gen
Donotoperate
3-42