WARNING – DO NOT USE IN VOLATILE OR EXPLOSIVE ATMOSPHERES
Always be aware of the risks in the environment where you are working.
The Microdust Pro instrument is NOT intrinsically safe. DO NOT use it in an
atmosphere where explosive concentrations of vapours or dusts might exist.
Wear approved ear defenders when making measurements in noisy
environments.
Wear approved protective clothing and footwear suitable for the environment
where you are making measurements.
Always follow local safety regulations, and be aware of risks in the area where
you are working.
CAUTION - GENERAL
Use the Microdust Pro instrument only as instructed in this User Manual. Do not use the
instrument for any purposes for which it has not been designed.
The Microdust Pro is a precision instrument. Always handle it with care.
Do not use the Microdust Pro instrument if it has been damaged. Refer to section 10
Servicing and warranty arrangements beginning on page 58 for instructions to follow if
the instrument has been damaged or has developed a fault.
The Microdust Pro instrument can operate from a battery power supply.
Use only batteries of the correct type, and do not mix battery types in the
instrument. Refer to Battery supply on page 13 for advice about battery types.
Do not leave discharged batteries in the instrument.
Install new batteries as a complete set. Do not fit batteries that have a mixed
state of charge. Refer to How to fit new batteries on page 13 for instructions to
install batteries.
Remove all batteries from the Microdust Pro instrument if you will not use the
instrument for a long time.
Always follow local regulations to dispose of used batteries.
The Microdust Pro instrument is not waterproof. Do not immerse the instrument in water
or use it in the rain.
To Next Page
Loading...
