CEL-712 Microdust Pro Real-time Dust Monitor
6 Casella Measurement
1.2 Safety
The Microdust Pro instrument does not present a safety risk when you use it as
instructed in this User Manual. However, it is possible that the environment
where you use the instrument may present a safety risk, and you must ALWAYS
follow correct, safe working practices.
WARNING - CLASS 1 LASER PRODUCT
The Microdust Pro instrument is an enclosed Laser based system.
The internal laser radiation is the equivalent of Class 2 under normal conditions
and potentially 3B under fault conditions.
Laser Source <20mW @ 635 nm.
Caution ā use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
Risk of Visible Laser Radiation when opened. Avoid exposure to beam.
This product shall only be opened by authorised and competent personnel.
The following warning labels are displayed on this instrument:-
To Next Page
Loading...
