EN-23
Stopwatch
The stopwatch lets you measure elapsed time, split times,
and two finishes.
• The display range of the stopwatch is 23 hours,
59minutes, 59.99 seconds.
• The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
• An ongoing elapsed time measurement operation
will continue internally even if you change to another
mode. However, if you exit the Stopwatch Mode while
a split time is displayed, the split time will not be
displayed when you return to the Stopwatch Mode.
• All of the operations in this section are performed in
the Stopwatch Mode, which you enter by pressing B
(page EN-8).
Seconds
Hours
1/100 second
Minutes
To Next Page
Loading...
