EN-16
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode
the watch is in. In the case of the snooze alarm, the alarm operation is performed a
total of seven times, every five minutes, until you turn the alarm off or change it to a
one-time alarm (page EN-17).
• To stop the alarm tone after it starts to sound, press any button.
• Performing any one of the following operations during a 5-minute interval
between snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen (page EN-9)
Displaying the alarm 1 setting screen (page EN-14)
To test the alarm
• In the Alarm Mode, hold down C to sound the alarm.
To Next Page
Loading...
