Why is my Casio 5061 second hand jumping?
The second hand on your Casio Watch may be jumping in two-second steps because the power is low. To resolve this, expose the watch to light until the second hand starts moving normally, in one-second steps.
What to do if all hands stopped at 12 o'clock on Casio 5061 Watch?
If all the watch’s hands are stopped at 12 o’clock and none of the buttons work, power may be low. Expose the watch to light until the x Second Hand starts moving normally, at one-second steps.
Why is World Time one hour off on Casio 5061?
If the World Time indicated by the Right Dial Hands in the World Time Mode is one hour off from the actual time in the selected time zone, the STD (standard time)/DST (daylight saving time) setting of the selected World Time City may be wrong. Select the correct STD (standard time)/DST (daylight saving time) setting.
What to do if hands suddenly stop moving on Casio Watch?
If the hands suddenly stop moving and button operation is also disabled on your Casio Watch, the watch may be in the power recovery mode. Do not perform any operation until the hands return to their normal positions (in about 15 minutes). The hands should return to their correct positions when normal operation returns. To help power recover, leave the watch in a location where it is exposed to light.
Why is my Casio 5061 Watch one hour off?
If you are using the watch in an area where time calibration signal reception is possible, see 'To configure Home City settings'. If you are using in the watch in an area where time calibration signal reception is not possible, you may need to change your Home City’s STD (standard time)/DST (daylight saving time) setting manually. Use the procedure under 'To toggle the Home City time between standard time and daylight saving time' to change the STD (standard time)/DST (daylight saving time) setting.
Why auto receive is not performed on my Casio 5061?
Auto Receive is not performed while the watch is in the Stopwatch Mode or Countdown Timer Mode. Hold down C for about two seconds to enter the Timekeeping Mode. Your Home City setting may be wrong, so you should check it and correct it if necessary. Also, both Auto Receive and Manual Receive are impossible while a countdown is in progress, so in the Countdown Timer Mode, stop the timer operation and then return to the Timekeeping Mode. There may also not be enough power for signal reception, so expose the watch to light to charge it.
Why won't my Casio 5061 turn on after being exposed to light?
If the watch does not resume operation after you expose it to light, this can happen after the power level drops to Level 3. Continue exposing the watch to light until the x Second Hand starts moving normally (at one-second steps).
General| Model | 5061 |
|---|---|
| Type | Digital |
| Display | LCD |
| Movement | Quartz |
| Brand | Casio |
| Battery Life | Approximately 2 years |
| Features | Alarm, Stopwatch, Countdown Timer, LED Light |
| Category | Watch |
Identifies the watch hands and indicators used in the manual and their functions.
Verify the smooth movement of the second hand to determine the watch's power level and charging status.
Configure your Home City and daylight saving time settings for accurate timekeeping.
Set the watch's current time either manually or via a time calibration signal.
Instructions on how to expose the watch to light for optimal charging and prevent sleep mode.
Understand the watch's power status by observing the second hand's movement.
Explanation of the mode where hand operation is temporarily stopped due to low power.
Details on how the watch conserves power by entering sleep states when in darkness.
Lists cities and their corresponding transmitter locations for receiving time calibration signals.
Information on approximate reception ranges and factors affecting signal reception.
Steps to prepare the watch and location for successful time signal reception.
Explains the differences and procedures for automatic and manual time signal reception.
How to interpret the results of the latest time signal reception operation.
Important warnings and considerations for using the radio-controlled timekeeping feature.
Instructions on how to determine the current watch mode and switch between modes.
View current time and date, configure Home City and DST, and perform time calibration.
Measure elapsed time and split times accurately.
Set and operate a countdown timer, with alarm notification.
Check current time in 29 different time zones around the globe.
Set and manage daily alarms.
Details the roles of each hand and dial in the Timekeeping Mode.
Procedure to select the Home City code for accurate time calibration.
How to switch between Standard Time (STD) and Daylight Saving Time (DST) for the Home City.
Steps to manually adjust the watch's current time if signal reception fails.
Procedure to manually set the year, month, and day.
Identifies the hands and their functions for stopwatch operations.
Instructions on how to start, stop, restart, and reset the stopwatch for elapsed time.
How to pause the stopwatch to record split times.
Explains the function of hands for countdown timer operations.
Procedure to set the desired start time for the countdown timer.
Steps to start, stop, and reset the countdown timer, and its behavior upon completion.
Identifies hands used to display World Time City and its time.
How to select a World Time City and view its current time.
How to toggle between standard and daylight saving time for a selected World Time City.
Procedure to exchange the Home City and World Time City settings.
Details the hands that indicate alarm ON/OFF status and alarm time.
Steps to set a specific time for the daily alarm.
How to enable or disable the daily alarm.
Steps to realign watch hands and indicators to their correct home positions.
Resolving problems related to unexpected hand movement or incorrect positions.
Solutions for issues with World Time display and watch charging.
Troubleshooting common causes for failed or incorrect radio time signal reception.
Addressing problems with manual time setting, DST changes, and mode operations.
Details on accuracy, calendar, and city code capabilities.
Information on receivable time calibration signals and power supply.
Details on World Time cities, alarm functions, and power saving.
Information on water resistance levels and appropriate daily use scenarios.
Precautions for handling the watch band, including cleaning and material care.
Warnings about exposing the watch to high or low temperatures.
Guidance on how impact, magnetism, and electrostatic charge can affect watch performance.
General advice on keeping the watch clean, including case, band, and preventing rust.
Information on risks associated with inadequate watch maintenance like rust and skin irritation.
A comprehensive list of city codes with their corresponding UTC offsets and GMT differentials.
To Next Page
