— 1 —
1. SPECIFICATIONS
Model: E-200
Display: 240 × 320 dots
TFT Color LCD (65,536 colors)
CPU: Intel
®
StrongARM Processor (206 MHz)
Memory: ROM 32 MB Flash ROM
RAM 64 MB
Interfaces: Serial: RS-232C, 115.2 kbps max.
Infrared: IrDA Ver. 1.2
Range: 20 cm max.
USB (Host/Client)
Card Slot: CompactFlash card, 3.3 V Type I / Type II
SD memory card/MultiMediaCard
Headphone jack: ø 3.5 mm stereo output
Accepts monaural earphone, stereo earphones/headphones.
Power Supply: Main: Rechargeable battery pack JK-214LT (Lithium-Ion battery)
AC adapter (AD-C54240E)
Backup: One CR2032 lithium battery
Power Consumption: 4.5 W
Approximate Battery Life (Normal Temperature)
Main: (Actual time may be shorter due to conditions when charging.)
12 hours: Continuous input and data display at a ratio of 1:10, front
light off.
• Even when the unit is turned off, small amounts of power are
required to retain memory contents, etc. This can cause batteries to
go dead even when you do not use the unit.
• The actual amount of operation time that can be expected from
batteries depends on operating conditions, settings, and other
variables.
Backup: 5 years: Main battery is charged or replaced immediately after
appearance of message to replace main battery.
1 week: No battery replacement after appearance of message to
replace main battery.
Approximate Charge Time (Normal Temperature)
4 hours: Charge time is longer for the first charges after purchasing
the unit or installing a new battery pack.
Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
Charging Temperature: 10 °C to 35 °C (50 °F to 95 °F)
Dimensions: 17.5H × 82W × 130D mm (0.69 × 3.2 × 5.1 inch)
Weight: Approximately 190 g (6.7 oz)
• The TFT color LCD is a product of the latest color LCD manufacturing technology.
However, virtually all TFT color LCDs have a very small number of pixels (about 0.01 % of the total
number of pixels) that do not turn on or always remain turned on.
This is normal and does not indicate malfunction.
• Playing back movies, digital camera images, and audio files consumes large amounts of power and may
cause the unit to become warm to the touch. This is normal and does not indicate malfunction.
• Inserting or removing a Storage card while the unit is off causes power to turn on automatically. This is
done so the unit can detect the card slot status.
To Next Page
Loading...
