— 9 —
5-3. Operation
Using the Stylus
Data input and virtually all other operations are performed using a stylus, which is housed inside the stylus
holder in the right corner of the unit.
• Use only the stylus that comes with the unit, or some other stylus type instrument with a soft, blunt
point to perform touch screen operations. Never use a pen, pencil, or other sharp writing implement.
Recalibrating the Touch Screen
Recalibrate the touch screen whenever touch screen response is bad, or when the operation performed is
different from the operation you expected when tapping on the touch screen.
To recalibrate the touch screen, press the [Action] control while holding down the [Power] button (or tap ,
Settings, the System tab, and then the Align Screen). Next, follow the instructions that appear on the screen.
Adjusting Display Brightness
Use the following operations to adjust display brightness to make it easier to read.
• Tap and then Settings. On the System tab, tap Brightness. On the dialog box that appears, tap the
Brightness tab.
• While holding down the [Action] button, press the right side of the cursor button to make the screen brighter,
or the left side of the cursor button to make it dimmer.
Adjusting Auto Dimming Settings
1. Tap and then Settings. On the System tab, tap Brightness.
2. On the dialog box that appears, tap the Auto Dim tab.
3. Follow the instructions that appear on the screen to make auto dimming settings.
• The separate auto dimming settings for battery power and AC adapter power can be done by selecting the
appropriate check box.
• The front light turns back on whenever the unit is pressed a button or tap the screen while the unit is turned
off.
Changing Applications Assigned to the Program Button
• Tap and then Settings. On the Personal tab, tap Button, and then follow the instructions that appear on
the display.
Using the Cradle
The cradle provides quick and easy connection between the unit and a computer.
• The unit can be powered by AC power when it is placed on the cradle.
• The battery pack charges while the unit is on the cradle.
• The cradle is equipped with a USB-A connector to connect another USB device.
• Before connecting the unit to a computer, make sure first installation of the ActiveSync on connected
computer.
To Next Page
Loading...
