— 6 —
Note
• Different minimum system requirements are required when using the applications included on the
CASSIOPEIA Applications CD-ROM
. See the documentation contained on the CD-ROM for full details.
• The cradle that comes with the unit is designed for USB connection only.
If your computer does not have a USB port, necessary to purchase the separate 20Pin/USB host Converter
(JK-744CV) and the serial connection cable (JK-580CA), which allow direct connection between the unit
and connected computer’s serial port.
• Certain computer hardware and/or software configurations may not allow PC Connect to run properly.
• When installing ActiveSync on a computer, check to make sure that the specified COM port number
correctly indicates the serial port to which the cradle is connected.
• Some laptop and sub-compact computers with built-in infrared ports and modems are initially
configured so the COM port is not always used as a serial port. In such a case, the setting must be
changed so the COM port is always used as a serial port.
See the documentation that comes with connected computer for full details on COM port numbers
and settings.
To Next Page
Loading...
