OTHER SETTINGS
132
Changing the Display Language
You can use the following procedure to select one of ten
language as the display language.
1.
In the REC mode or the PLAY mode, press
[MENU].
2.
Select the “Set Up” tab, select “Language”,
and then press [].
3.
Use [], [], [], and [] to change the
setting, and then press [SET].
: Japanese
English : English
Français : French
Deutsch : German
Español : Spanish
Italiano : Italian
Português : Portuguese
: Chinese (Complex)
: Chinese (Simplified)
: Korean
Changing the USB Port Protocol
You can use the procedure below to change the
communication protocol of the camera’s USB port when
connecting to a computer, printer, or other external device.
Select the protocol that suits the device to which you are
connecting.
1.
In the REC mode or the PLAY mode, press
[MENU].
2.
Select the “Set Up” tab, select “USB”, and
then press [].
3.
Use [] and [] to select the setting you
want, and then press [SET].
Select this setting:
Mass Storage (USB
DIRECT-PRINT)
PTP (PictBridge)*
When connecting to this type of
device:
Computer or USB DIRECT-
PRINT-compatible printer (page
146)
PictBridge-compatible printer
(page 146)
* “PTP” stands for “Picture Transfer Protocol”.
To Next Page
Loading...
Need help?
General
