OTHER SETTINGS
133
Configuring [ ] (REC) and [ ] (PLAY)
Buttons Power On/Off Functions
You can use the following procedures to configure the [ ]
(REC) and [ ] (PLAY) buttons so power turns and/or off
whenever they are pressed.
1.
In the REC mode or the PLAY mode, press
[MENU].
2.
Select the “Set Up” tab, select “REC/PLAY”,
and then press [].
3.
Use [] and [] to select the setting you
want, and then press [SET].
• PTP (PictBridge) simplifies the transfer of image data
to the connected device.
• Mass Storage (USB DIRECT-PRINT) causes the
camera to see the computer as an external storage
device. Use this setting for normal transfer of images
from the camera to a computer (using the bundled
Photo Loader application).
To Next Page
Loading...
