12
Quick Start Basics
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates
remaining power as shown below.
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when is indicated. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about three days with no power supplied while the battery
is dead will cause its date and time settings to be cleared. You will have to re-
configure the settings after power is restored.
• See page 135 for information about battery life and memory capacity.
Battery Power Conservation Tips
• When you do not need to use the flash, select ? (flash off) for the flash setting
(page 26).
• Enable the Auto Power Off and the Sleep features to protect against wasting
battery power when you forget to turn off the camera (pages 101, 102).
Remaining Power High Low
Battery Indicator ***
Indicator Color Cyan * Amber * Red * Red
To Next Page
Loading...
Need help?
General
