42
Recording Movie Images and Audio
Voice Recording lets you record audio only, without a snapshot or movie. You can
record about 53 minutes and 45 seconds of Voice Recording using the camera’s
built-in memory only.
1. In the REC mode, press [BS].
2. Use [8], [2], [4], and [6] to select the
`
(Voice Recording) scene
and then press [SET].
This causes ` to appear on the monitor screen.
3. Press the shutter button to start recording.
• The back lamp flashes green while recording is in
progress.
• Pressing [SET] during recording will insert a marker
into the recording. During playback, you will be able
to jump to the markers in the recording.
4. Press the shutter button again to stop audio
recording.
• To create another audio recording file, repeat steps 3
and 4.
• To turn off Voice Recording, press [BS] and then
select R (Auto).
NOTE
• You can use [8] (DISP) during audio recording to toggle the monitor screen on
and off.
• When monitor screen contents are turned off, selecting the “Voice Recording”
scene will cause the monitor screen to turn off immediately (page 105).
Recording Audio Only (Voice Recording)
Recording time
Remaining recording
time
To Next Page
Loading...
Need help?
General
