31
Snapshot Tutorial
NOTE
• Anti Shake is disabled during movie recording.
• ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen
when you half-press the shutter button while “D Auto” is selected. These values
will appear briefly, however, in the preview image that is displayed immediately
after you shoot a snapshot.
• The ISO sensitivity setting (page 32) must be “AUTO” for “S Image AS” to work.
• If the flash fires, the Anti Shake icon S will remain on the display, even though
Anti Shake does not function during flash photography.
• Shooting with Anti Shake can cause an image to appear somewhat coarser than
normal and can cause slight deterioration of image resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
•“A Camera AS” may not work properly when the camera is mounted on a tripod.
Either turn off Anti Shake or select “S Image AS”.
To Next Page
Loading...
Need help?
General
