PLAYBACK
159
2.
Turn on the TV and select its video input
mode.
3.
Perform either of the following operations.
• EX-Z60: Press [ ] to turn on the camera, and then
perform the required operation for playback.
• EX-Z60DX: Press [ ] or [ ] to turn on the
camera, and then perform the required operation for
playback or recording.
IMPORTANT!
• Make sure that “Power On” or “Power On/Off” is
selected for the camera’s power on/off functions
(page 178) when you connect to a TV to view
images.
• All icons and indicators that appear on the monitor
screen also appear on the TV screen.
• Note that the audio output is monaural.
• When the camera is on the USB cradle, pressing the
cradle’s [PHOTO] button will activate the Photo
Stand feature (page 152) and display images on the
TV screen (EX-Z60DX).
• Depending on the size of the TV screen, recorded
images and images during recording may not fill the
entire screen (EX-Z60).
• Depending on the size of the TV screen, recorded
images may not fill the entire screen (EX-Z60DX).
• For video output, the audio volume level is initially
set to maximum. Perform volume level adjustment
using TV controls.
• After using an optionally available AV cable (EMC-
3A) to connect the camera’s USB/AV connector
directly to the AUDIO IN terminal of a TV (without
using the USB cable), you can view recorded images
on the TV and even use the TV screen to compose
images before recording them (EX-Z60DX).
C
To Next Page
Loading...
Need help?
General
