82
Viewing Snapshots and Movies
The Movie Editing feature lets you use one of the following procedures to edit out a
specific part of a movie.
1. To pause movie playback, press [SET].
2. Press [2].
3. Use [8] and [2] to select the editing method you want to use and then
press [SET].
4. Use [4] and [6] to scroll through the movie and
search for the frame (point) from which or to
which you want to cut the movie (the cut point).
• You also can search for the cut location by playing
back the movie and pressing [SET] to pause. During
playback, you can press [4] or [6] to perform fast
reverse or fast forward.
Editing a Movie on the Camera (Movie Editing)
Cut
(To-Point Cut)
Cuts everything from the beginning of the movie up to the
current location.
Cut
(Point-To-Point Cut)
Cuts everything between two points.
Cut
(From-Point Cut)
Cuts everything from the current location to the end of the
movie.
Cut range (red)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
