167
Other Settings (SETTING)
Procedure
[MENU] * “¥ SETTING” Tab * Sleep
This feature turns off the monitor screen and lights the back lamp (green) whenever
no camera operation is performed for a preset period of time. Press any button to turn
the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is
selected.)
• Sleep is disabled under any of the following conditions.
– In the PLAY mode
– While the camera is connected to a computer or other device
– During movie recording and playback
• When both sleep and Auto Power Off are turned on, Auto Power Off takes priority.
Procedure
[MENU] * “¥ SETTING” Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for
a preset amount of time.
Trigger Time Settings: 2 min, 5 min, 10 min (The trigger time is always 5 minutes in
the PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During CS group playback
– During movie recording and playback
Procedure
[MENU] * “¥ SETTING” Tab * Screen Tilt
Configuring Sleep State Settings (Sleep)
Configuring Auto Power Off Settings (Auto Power Off)
Specifying the Operation when the Monitor Screen is Tilted
(Screen Tilt)
Power On Turns on the camera whenever the monitor screen is tilted.
On/Off
Turns on the camera whenever the monitor screen is tilted, and
turns it off when the monitor screen is returned to its normal
position.
Off
No power on/off operation performed when the monitor screen is
tilted or returned to its normal position.
To Next Page
Loading...
Need help?
General
