92
Using BEST SHOT
8. Use [8] and [2] to select the (Maximum CS Shots) Control Panel
option and then press [SET].
9. Use [8] and [2] to select the maximum number of shots and then
press [SET].
10.
Press the shutter button the rest of the way and hold it down.
Shooting of images will continue as long as you depress the shutter button or until
the maximum number of images specified by “High Speed CS fps” is reached.
. Shooting with Prerecord CS
Half-pressing and holding the shutter button causes a pre-record buffer to be
continually updated with images. When the shutter button is fully pressed, buffer
contents are recorded along with a series of real-time images. Use Prerecord CS
when you want to make sure you do not miss fast-moving action.
1. Align the mode dial with [b] (BEST SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Select “High Speed CS” and then press [SET].
5. Press [SET].
6. Use [8] and [2] to select the (High Speed CS (fps)) Control Panel
option and then press [SET].
7. Use [8] and [2] to select the continuous shutter (CS) speed you want
and then press [4].
• Use a higher “High Speed CS fps” setting when shooting a fast-moving subject.
Shutter button
half-press
Recorded images (up to 30 images)
Pre-recorded images
Shutter button
full-press
Shutter button
release
Continuous recording of images until shutter
button released
To Next Page
Loading...
