96
Using BEST SHOT
Full Focus Macro shoots and analyzes a burst of multiple images and combines them
in a way that produces an image in which everything is in focus: from nearby objects
to distant objects.
1. Align the mode dial with [b] (BEST SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Select “All-In-Focus Macro” and then press [SET].
5. Press the shutter button to shoot.
• Move the camera as close to the subject as possible, and take care to avoid
camera movement and subject movement as you shoot.
• After you press the shutter button, the message “Busy... Please wait...” will
appear on the monitor screen to let you know that shooting is in progress. Do
not move the camera while this message is displayed. The recording process
takes some time to complete after the message appears. Image shooting is
disabled while the message is displayed.
NOTE
• When shooting with this function, zoom is fixed at wide angle.
• When shooting with this function, the flash setting automatically becomes
? (Flash Off).
• The desired effect may not be attained if the camera or subject moves during
shooting.
• Depending on shooting conditions, image composition, and the subject you are
shooting, this BEST SHOT scene may not be able to produce the desired result.
• The message “Image merging failed.” will appear if the All-In-Focus Macro process
cannot be performed for some reason. The images shot by the camera will be
saved even if they cannot be merged.
Shooting with Full Focus Macro (All-In-Focus Macro)
Program Auto image All-In-Focus Macro
To Next Page
Loading...
Need help?
General
