26
Quick Start Basics
1. Press [ON/OFF] (Power) to turn on the camera.
The camera will enter the REC mode.
Make sure R is on the display. If it isn’t, see page 50.
• If the camera is in the PLAY mode, press [r] (REC).
• You also can configure the camera to turn on when you press [r] (REC) or
[p] (PLAY) (page 107).
2. Point the camera
at the subject.
You can zoom the
image, if you want.
To shoot a snapshot
Monitor screen
Shutter button
[p] (PLAY)
Remaining Snapshot Memory
Capacity (page 130)
Snapshot mode icon
[ON/OFF] (Power)
[r] (REC)
w Wide Angle z Telephoto
Zoom controller
To Next Page
Loading...
