121
Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * P Display
The PLAY mode screen layout settings let you select how display images are shown
on the monitor screen.
Procedure
[MENU] * Set Up Tab * Sounds
• Setting a volume level of 0 mutes output.
Selecting a PLAY Mode Screen Layout (P Display)
Wide
With this setting, the display image is the
maximum possible size that allows the entire
image to be displayed horizontally. With some
aspect ratios, the top and bottom of the image
will be cut off.
4:3
100% of the display image is always visible.
With some aspect ratios, black bands may
appear above and below, or to the left and right
of the image.
Configuring Camera Sound Settings (Sounds)
Startup
Specifies the startup sound
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Half Shutter
Shutter
Operation
Operation ( )
Specifies the sound volume. This setting is also used as the
audio level during video output (page 78).
Play ( )
Specifies the volume of movie and Audio Snapshot audio
output. This volume setting is not used during video output
(from the USB/AV port).
To Next Page
Loading...
Need help?
General
