19
Quick Start Basics
Use the following procedure to view snapshots on the camera’s monitor screen.
• For information about how to play back movies, see page 75.
1. Press [p] (PLAY) to enter the
PLAY mode.
• This will display one of the
snapshots currently stored in
memory.
• Information about the displayed
snapshot also is included (page
147).
• You also can clear the information to view only the snapshot (page 130).
• You can zoom in on the image by sliding the zoom controller towards z (page
76). If you are recording a snapshot that is very important to you, it is
recommended that you zoom the image and check its details after recording it.
2. Use [4] and [6] to scroll between images.
• Holding down either button scrolls at high speed.
Viewing Snapshots
[p] (PLAY)
[6]
[6]
[4]
[4]
To Next Page
Loading...
Need help?
General
