1-14
Example: To input the command “FMax(”
A!e(CATALOG)6(CAT)
1(EXE)t(F)h(M)
1(INPUT)
Using the Command History
The calculator maintains a history of the last six commands you input.
1. Display one of the command lists.
2. Press 5(HISTORY).
This displays the command history. •
3. Use f and c to move the highlighting to the command you want to input and then press
1(INPUT) or w.
QR Code Function
You can use the QR Code function to access the online manual that covers commands.
Note that the online manual does not include all commands. Note that the QR Code function
cannot be used on the history screen.
A QR Code* is displayed on the calculator screen. Use a smart device to read the QR Code
and display the online manual.
* QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and in
other countries.
Important!
The operations in this section assume that the smart device being used has a QR Code
reader installed, and it can connect to the Internet.
u
u
•
•
•
To Next Page
Loading...
