16-10
3(P&V) ... Select to input the coordinates of one point on the straight line and the
coefficients of a direction vector.
4(POINTS) ... Select to input the coordinates of two points on a straight line.
Inputting a coefficient that matches any of the conditions below will cause an “Invalid Setting”
error.
EXPRESS: a=0 or b=0 or c=0
VECTOR: All v vector coefficients 0
P&V: All direction vector coefficients 0
POINTS: P1 and P2 the same value
Plane Template
There are input screens for three types of coefficients.
1(EXPRESS) ... Select to input the coefficients of a function for a plane.
2(VECTOR) ... Select to input the coefficients of a vector for a plane.
•
•
•
•
•
u
To Next Page
Loading...
