To Next Page
R
Regina BaileyAug 29, 2025
Why doesn't the tape from my Casio KL-7000 stick?
- AAmy HendersonAug 29, 2025
If the tape from your Casio Label Maker isn't sticking, make sure you remove the paper backing from the tape.
Why doesn't the tape from my Casio KL-7000 stick?
If the tape from your Casio Label Maker isn't sticking, make sure you remove the paper backing from the tape.
What to do if tape comes out but nothing is printed on my Casio KL-7000?
If your Casio Label Maker is feeding tape but not printing anything, check to see if you have only input blank spaces. Input other text.
How to prevent text from being cut off on my Casio Label Maker?
If the text is being cut off when using your Casio Label Maker: * Auto Feed might be switched off. Press FUNC FEED to feed tape before cutting it. * You may have reached the end of the tape. Load a new tape cartridge.
Why can't I input characters on my Casio KL-7000 Label Maker?
If you cannot input characters on your Casio Label Maker, it might be because the FUNC key was pressed. Press ESC to clear the function indicator from the display.
How to fix unclear printing on Casio Label Maker?
If the print quality on your Casio Label Maker is poor, try the following: * Replace the batteries, as low power can cause unclear printing. * Adjust the printing density setting. * Ensure the tape cartridge is correctly loaded. * Clean the printer head and roller.
What to do if no tape comes out of my Casio Label Maker when I press PRINT?
If your Casio Label Maker doesn't dispense tape when you press PRINT, consider these potential causes: * The tape cartridge cover might not be securely closed; ensure it's properly closed. * You may be out of tape; load a new tape cartridge. * The tape might be jammed; remove the cartridge, carefully remove any jammed tape (avoiding contact with the cutter or outlet), and cut it off. * The batteries might be low; try replacing them.
General| Brand | Casio |
|---|---|
| Model | KL-7000 |
| Category | Label Maker |
| Language | English |
Crucial safety guidelines and warnings to ensure proper and safe operation of the label printer.
Details power sources, battery replacement, AC adapter usage, and powering on/off.
Procedure to reset memory and instructions for loading tape cartridges.
Basic input of letters/numbers and use of the CODE key for special characters.
Explains cursor navigation and methods for deleting individual characters.
How to delete multiple characters and clear text using the CLS function.
Explains the difference and usage of overwrite and insert modes for text input.
Ways to set character attributes like font, style, and size before, during, or after input.
How to change attributes and apply text effects to text ranges.
Important precautions before printing and basic steps to print text onto tape.
Procedure to clean printer parts and reset the unit in case of malfunction.
Common problems, their causes, and solutions for the label printer.
Explains various messages displayed by the printer and their meanings.
