Casio QT-6000 Reference Manual

R-16
Hardware Configuration
1-7. Optional peripherals
The following optional peripherals can be used by plugging them into the appropriate port.
1) Personal computer / MODEM: RS-232C COM 1 port
2) Scanner: RS-232C COM 2 port
Hand-held scanner (HHS-15)
3) Slip printer: RS-232C COM 2 port
SP-1300
In case of installing both scanner and slip printer, connect slip to COM 4 port.
If you connect the slip printer to COM 4 , the automatic detection during INIT does not
performed. You muse program the I/O parameter manually.
4) Remote display: RS-232C COM 3 port
QT-6060D
5) Remote printer (UP-350/360, UP-250): RS-232C COM 4 ~ 6 port
The remote printer is used for reports/kitchen orders/receipts.
6) Inline: Inline port
You can use CAT5 UTP cable.
7) Drawer: drawer port
8) CF card: CF card slot (in the card slot cover)
9) Wireless LAN card: PCMCIA interface (in the card slot cover)

Casio QT-6000 Specifications

General

Types of payment	Cash
Second display	Yes
Second display type	LED
Power source	AC
AC input voltage	120-240 V
Power consumption	1100 mA
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	311 mm
Width	343 mm
Height	288 mm
Weight	5300 g