Casio QT-6000 Reference Manual

R-65
QT-6000 Reference Manual
2-11. Sign on control
This function is used to prohibit the sign-on operation by an employee who has not
CLOCK-IN. The following conditions should be fixed.
•Use only one terminal (master terminal) for the CLOCK-IN/OUT operation. This
terminal should be connected inline to the satellite terminals. But the time and
attendance work file (file 806) should be allocated to all terminals.
• The clerk file’s information should be common among all the terminals.
•Be sure there is a clerk who is specified as “Manager” in the clerk file. If no manager,
it may be locked to operate.
2-11-1. Sign on
1. When an employee normally operate CLOCK-IN/OUT, BREAK-IN/OUT, the
employee’s attendance information is sent from the main terminal to the satellite
terminals.
Flow of sign on
Sign on OK
CLOCK-IN
CLOCK-IN unfinished
Unable to Sign on
(E175 Error message appears)
He/she is NOT in the
middle of BREAK-IN
He/she is in the
middle of BREAK-IN
Sign on OK
Unable to Sign on
(E175 Error message appears)
Sign on by
Manager
Sign on by
Clerk
CLK# information
CLK#1 information
CLK#2 information
CLK#3 information
•
•
CLK#99 information

Casio QT-6000 Specifications

General

Types of payment	Cash
Second display	Yes
Second display type	LED
Power source	AC
AC input voltage	120-240 V
Power consumption	1100 mA
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	311 mm
Width	343 mm
Height	288 mm
Weight	5300 g