Casio QT-6000 Reference Manual

R-201
QT-6000 Reference Manual
A-4-2 Operation prompt
All prompt messages, together with descriptors and symbol characters for displaying /
printing are contained in the list below. These messages cannot be added, modified or
deleted.
Prompt message Meaning
Data cannot be printed out.
Backup to R/J printer?
Do you want to clear data?
Cancel OK?
Please wait.
Item Consolidation Mode
Non Consolidation Mode
REG Mode
REFUND Mode
REG- Mode
Training
REG2 Mode
Please Sign on.
Enter Check/Table Number.
Enter Table Number.
Enter Number of covers.
Enter Seat Number.
Perform Slip Printing.
Issue Guest Receipt.
Perform Validation Printing.
Perform Check Printing.
Perform Check Endorsement.
Operation Code?
Re_configuration...
Re_configuration end
Clock-in OK?
Clock-out OK?
Break-in OK?
Break-out OK?
Enter cash tip amount and press
<YES> key.
Communication Error
This procedure stops system
maximum 60 sec.
OK ?
Enter #
Enter Alphacode!
Items not found!
Request to check the X / Z report data which
cannot be printed out.
Confirmation to reset displayed report.
Confirmation of all void operation.
Please wait. ECR now processing.
In the item consolidation mode.
Not in the item consolidation mode.
Mode change : REG mode
Mode change : REF mode
Mode change : REG– mode
Signing on a training operator
Mode change : REG2 mode
The terminal is in signed off.
CHK# compulsory
TBL# compulsory
Covers compulsory
Seat# compulsory
Slip compulsory
GUEST RCT compulsory
VLD compulsory
CHK-PRT compulsory
CHK-END compulsory
Enter secret number for REG 2 mode.
During system reconfiguration
System reconfugiration ends
Time and attendance clock-in operation
Time and attendance clock-out operation
Time and attendance break-in operation
Time and attendance break-out operation
Time and attendance tip declaration compulsory
Communication error during clock-in
Alert before flash memory clear.
Registering Non-add after RC / PD.
To search the appropriate item, enter goods name.
Items cannot be found by item searching.

Casio QT-6000 Specifications

General

Types of payment	Cash
Second display	Yes
Second display type	LED
Power source	AC
AC input voltage	120-240 V
Power consumption	1100 mA
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	311 mm
Width	343 mm
Height	288 mm
Weight	5300 g