Casio QT-6000 Reference Manual

R-36
Application System
71) Break-in / out key (Function code 109)
This key is used to register the starting / finishing time when employees have a recess.
Programmability: Refer to page 97 of the programming manual.
72) Coupon number key (Function code 110)
This key is used to enter coupon number for registering mix and match discount.
Programmability: Refer to page 100 of the programming manual.
73) Substitution key (Function code 111)
Replaces group PLU with a PLU not preset in the pulldown menu.
74) Ketten Bon key (Function code 113)
This key is used to enter quantities for multiplication. Multiplication by this key issues
singular order prints.
Programmability: Refer to page 96 of the programming manual.
75) House Bon key (Function code 114)
This key is used to register items for in-store use.
76) Post entry key (Function code 115)
This key is used in a check tracking or clerk interrupt system to indicate the reserved item
of set menu and register it as a fixed item later on.
– Enter post entry
Press this key while the window is opened, the key descriptor appears on the screen and
it is registered as a reserved item.
– Fix post entry
After finishing the set menu registration, move the cursor on to the reserved item, press
this key again, then the appropriate window will be opened to fix it.
77) Round repeat key (Function code 116)
This key is used to register the same items which were ordered just before.
Programmability: Refer to page 98 of the programming manual.
78) Open check key (Function code 117)
This key is used to issue an open check report of an assigned clerk.
Programmability: Refer to page 96 of the programming manual.
79) Media change key (Function code 118)
This key is used to change media in drawer amounts. Pressing this key enters media change
operation.
80) Seat number key (Function code 119)
This key is used to enter and print seat number.
81) Eat-in key (Function code 128)
This key is used to specify if the customer eats in the restaurant. Before closing a
transaction, press this key.
Programmability: Refer to page 98 of the programming manual.
82) Takeout key (Function code 129)
This key is used to specify if the customer takes out items. Before closing a transaction,
press this key for the tax exemption.
Programmability: Refer to page 98 of the programming manual.
83) Store key (Function code 130)
This key is used for storing the check number of the registered items. Allocate this key to
the terminal at the drive-through entrance. When this key is pressed, registered item data
will be stored, and then these data will transfer to the youngest check number.
Programmability: Refer to page 98 of the programming manual.
(future use)

Casio QT-6000 Specifications

General

Types of payment	Cash
Second display	Yes
Second display type	LED
Power source	AC
AC input voltage	120-240 V
Power consumption	1100 mA
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	311 mm
Width	343 mm
Height	288 mm
Weight	5300 g