Casio QT-6600

R-98
Manager Operation
3-3-11. Item Data Capture
You can change the IDC status (capture transaction data or not) by the operation described
below.
1. Sign on a clerk (if necessary).
2. Press <Manager> to assign manager mode.
3. Select “11. Item Data Capture” and press the <YES> key.
4. Choose the option “YES (capture item data) / NO (not capture
item data)” and press the <ESC> key.
Item Data Capture
Item Data Capture YES
0.00
MGR C 01 10-10-01 12:34 000000
Manager Mode
9.Error Log Print
↑
10.System Re-configuration
11.Item Data Capture
12.EURO Change over
13.Clerk Window
14.Customer
15.Customer Busy Reset
16.Recording
↓
0.00