Casio QT-6600 Reference Manual

R-52
Application System
Note:
• Set a “%GET” command, first, to use the number entered by the arrangement key later.
• When the “%GET” is programmed following constant number input, the constant
number is saved to the parameter save buffer.
• Numbers input using a “%PUT” command or by “([number])” are entered to the
number entry buffer in the same way as numbers input using the 10-key pad.
2) Key function specification
Any function key can be specified for an arrangement key function. :
[function code]:[record number] → Used for ordinary function keys
The numbers can be specified for zero suppression.
Note:
The arrangement key itself, cannot be programmed for in an arrangement program.
3) Mode setting
Any mode key can be specified for an arrangement key function. :
[function code]:[mode definition]→ Used for mode keys
Note:
121:01 : REG mode
121:02 : REF mode
121:03 : REG– mode
122:01 : X/Z mode:
122:02 : MGR mode:
122:03 : Collection/Consolidation mode:
122:04 : Auto-program mode:
122:05 : CF card:
123:01 : PGM1 mode:
123:02 : PGM2 mode:
123:03 : PGM3 mode:
123:04 : PGM4 mode:
123:05 : PGM5 mode:
123:06 : PGM6 mode:
4) Print control
There are two commands for controlling the printer:
PON : Output printout data.
POFF : Not output printout data.

Casio QT-6600 Specifications

General

Brand	Casio
Model	QT-6600
Category	Touch terminals
Language	English