Why won't my Casio Digital Camera power on?
If your Casio Digital Camera isn't powering on, it might be due to several reasons. First, ensure the batteries are correctly oriented. Second, the batteries may be dead; try charging them or replacing them if they drain quickly. Lastly, make sure you're using the correct AC adapter (AD-C30) specified for your camera.
General| Optical Zoom | 3x |
|---|---|
| ISO Range | 50 - 400 |
| Video Resolution | 320 x 240 |
| Type | Compact |
| Digital Zoom | 4x |
| Focal Length | 5.8 - 17.4 mm |
| Image Sensor Type | CCD |
| Effective Pixels | 4.0 MP |
| Image Resolution | 2272 x 1704 |
| Storage | SD |
| Storage Media | SD |
| Battery Type | Lithium-ion |
Check to make sure that all of the items shown below are included with your camera.
Be sure to observe the following important precautions whenever using the QV-R40.
Charge the rechargeable nickel-metal hydride batteries (HR-3UA) that come with the camera.
Be sure to configure the following settings before using the camera to record images.
Point the camera at the subject, use the monitor screen or viewfinder to compose the image.
This section contains information about the conventions used in this manual.
The following illustrations show the names of each component, button, and switch on the camera.
The monitor screen uses various indicators and icons to keep you informed of the camera’s status.
Your camera features a two-way power supply that lets you use either AA-size batteries or household AC current.
You can use the steps below to charge the rechargeable nickel-metal hydride batteries (HR-3UA) using the charger unit (BC-5H).
Press the power button, [ ] (REC) button, or [ ] (PLAY) button.
Be sure to configure the following settings before using the camera to record images.
Your camera automatically adjusts shutter speed in accordance with the brightness of the subject.
Perform the following steps to select the flash mode you want to use.
You can specify the image size and image quality to suit the type of image you are recording.
You can select one of four different focus modes: Auto Focus, Macro, Infinity, and Manual.
Exposure compensation lets you change the exposure setting (EV value) manually to adjust for the lighting of your subject.
The wavelengths of the light produced by various light sources can affect the color of a subject.
Selecting one of the 21 Best Shot scenes automatically sets up the camera for recording a similar type of image.
You can record movies up to 30 seconds long.
You can use the [DISP] button to display a histogram on the monitor screen.
You can use the camera’s built-in monitor screen to view images after you record them.
Perform the following procedure to zoom the image currently on the monitor screen up to four times its normal size.
You can use the following procedure to change a snapshot image to either SXGA size or VGA size.
Use the following procedure when you want to crop a portion of an enlarged image.
Perform the following steps when you want to delete a single file.
The following procedure deletes all unprotected files currently in memory.
Your camera automatically creates a directory of image storage folders in its built-in Flash memory or on the memory card.
Once you protect a file it cannot be deleted. You can protect files individually or you can protect all files in memory.
The letters “DPOF” stand for “Digital Print Order Format”, which is a format for recording on a memory card.
Your camera supports USB DIRECT-PRINT, which was developed by Seiko Epson Corporation.
Use the following procedure to specify the method for generating the serial number used for file names.
Use the procedures in this section to select a Home Time Zone, and to change its date and time settings.
Formatting built-in memory deletes any data stored in it.
While pressing the battery compartment cover on the bottom of the camera, slide the cover in the direction indicated by the arrow.
Formatting a memory card deletes any data already stored on it.
Use only an SD memory card or a MultiMediaCard with this camera.
The following are the general steps for viewing and copying files from a computer running under Windows.
Be sure to connect the AC adaptor to the camera to supply power to the camera.
The following are the general steps for viewing and copying files from a Macintosh.
Note that the folder named “DCIM” is the parent (top) folder of all the files in memory.
The album feature creates an HTML photo album layout that displays your images.
You can select from among 10 different display layouts for an album.
Use the procedures in this section to install the software from the bundled CD-ROM to your computer.
The following shows lists of menus that appear in the REC mode and PLAY mode, and their settings.
The camera has three indicator lamps: a green operation lamp, a red operation lamp, and a self-timer lamp.
This section provides information on how to resolve common problems.
To Next Page
