105
OTHER RECORDING FUNCTIONS
When you want to assign this function to
[] and [] keys:
Recording mode
• [] and [] cycle through recording
modes: Snapshot, BESTSHOT, Movie
(page 50).
EV shift
• [] decreases compensation, []
increases compensation (page 77).
White balance setting
• [] and [] cycle through white
balance settings (page 78).
ISO sensitivity
• [] and [] cycle through ISO
sensitivity settings (page 98).
Self-timer mode
• [] and [] cycle through self-timer
modes (page 65).
No function assigned
Select this:
REC Mode
EV Shift
White Balance
ISO
Self-timer
Off
Specifying Power On Default Settings
The camera’s “mode memory” feature lets you specify the
power on default settings individually for the REC mode,
flash mode, focus mode, white balance mode, ISO
sensitivity, AF Area, metering mode, self-timer, flash
intensity, digital zoom mode, manual focus position, and
zoom position. Turning on mode memory for a mode tells
the camera to remember the status of that mode when you
turn off the camera, and restore it the next time you turn
the camera back on. When mode memory is turned off, the
camera automatically restores the initial factory default
setting for the applicable mode.
The following table shows what happens when you turn
mode memory on or off for each mode.
To Next Page
Loading...
Need help?
General
