86
OTHER RECORDING FUNCTIONS
IMPORTANT!
• Setups that you register as BESTSHOT sample
scenes are located after the built-in sample scenes.
• Note that formatting the built-in memory (page 143)
deletes all BESTSHOT user setups.
NOTE
• The following are the settings that are included in a
BESTSHOT user setup: focus mode, EV shift value,
filter, metering mode, white balance mode, flash
intensity, flash assist, sharpness, saturation,
contrast, flash mode, and ISO sensitivity.
• Note that images recorded with this camera only can
be used to create a BESTSHOT user setup.
• You can have up to 999 BESTSHOT user setups in
the camera’s built-in memory at one time.
• You can check the current setup of a scene by
displaying the various setting menus.
• When you register a BESTSHOT user setup, it is
automatically assigned a file name using the format
“UQR62nnn.JPE” (n=0 to 9).
■ To delete a BESTSHOT user setup
1.
Enter the REC Mode, and select “
BESTSHOT” as the recording mode (page 50).
2.
Use [] and [] to display the user setup you
want to delete.
3.
Press [] ( ) to delete the user setup.
4.
Use [] and [] to select “Delete”.
5.
Press [SET] to delete the file.
6.
Press [MENU] .
To Next Page
Loading...
Need help?
General
