PRINTING IMAGES
156
10
.
Use [왖] and [왔] to select the paper size you
want to use for printing, and then press [SET].
• The following are the print sizes that are available.
3.5˝
×
5˝
5˝
×
7˝
A4
4˝
×
6˝
By Printer
• Selecting “By Printer” prints using the paper size
selected on the printer.
• Available paper size settings depend on the
connected printer. For full details, see the
instructions that come with your printer.
11
.
On the print menu, use
[왖] and [왔] to select “1
Image”, and then press
[SET].
• You can use [왗] and [왘]
to select the image you
want to print.
• You can toggle date stamping of the image on and
off by pressing [DISP]. The
12
1
icon indicates that
date stamping is turned on.
12.
On the camera’s monitor screen, use [왖] and
[왔] to select “Print”, and then press [SET].
• This starts printing and displays the message
“Busy.... Please wait...” on the monitor screen. The
message will disappear after a short while, even
though printing is still being performed. Pressing any
of the camera’s buttons while printing is in progress
will cause the message to reappear.
• The print menu will appear when printing is
complete.
• To print again, repeat this step.
13.
The camera will turn off automatically when
printing is complete. After this happens,
disconnect the USB cable from the camera.
To Next Page
Loading...
Need help?
General
